Equipment
- Fused Deposition Modeling (FDM) Process
- Build volume – 29.5 L x 19.5 W x 16.5 H cm (11.16 x 7.6 x 6.5 in)
- MakerBot PLA and Tough Materials


- Fused Deposition Modeling (FDM) Process
- Build volume – 30.0 L x 30.5 W x 45.7 H cm (11.8 x 12.0 x 18.0 in)
- Material - PLA


MakerBot Method X Carbon Fiber Edition
- Fused Deposition Modeling (FDM) Process
- Maximum Build Volume:
- Single Extrusion – 19 L x 19 W x 19.6 H cm (7.5 x 7.5 x 7.75 in)
- Dual Extrusion – 15.2 L x 19 W x 19.6 H cm (6.0 x 7.5 x 7.75 in)
- Supported Materials: ABS, ASA, PLA, Tough, PVA, SR-30, Nylon, PETG, more to come


- Fused Deposition Modeling (FDM) Process
- Build volume:
- Left or Right Nozzle – 215 x 215 x 300 mm [8.5 x 8.5 x 11.8 in.]
- Dual Extrusion – 197 x 215 x 300 mm [7.8 x 8.5 x 11.8 in.]
- Supported Materials – Nylon, PLA, ABS, CPE, CPE+, PVA, PC, TPU 95A, and PP.


- Fused Deposition Modeling (FDM) Process
- Build Tray Dimensions – 8 x 8 x 6 inch (203 x 203 x 152 mm)
- Materials – ABSPlus P430, SR-30, SR-20, P400-SR, P400-R Support


Go!Scan20 and Go!Scan50 Portable 3D Scanners
- Ideal for Reverse Engineering Applications
- Scanning Area:
- Go!SCAN20 – 143 x 108 mm (5.6 x 4.3 in.)
- Go!SCAN50 – 380 x 380 mm (15.0 x 15.0 in)
- Resolution:
- Go!SCAN20 – 0.100 mm (0.0039 in.)
- Go!SCAN50 – 0.500 mm (0.0197 in.)


Other Fabrication, Post-Processing, and Hand Tools Available for Use:
- Basic Hand Tools
- Clean Stations for Prototyped Parts
- Dremel Tools
- File Sets
- Soldering Stations
- Other tools available upon request